Cement Whitlam PVC Gray Schedule 80 Low VOC Heavy-Bodied Cement This Low VOC heavy-bodied cement is for larger PVC pipe and fittings because it has high concentrations of resin for excellent filling characteristics. A slow set for use through 16" (40.64 cm) diameter Schedule 40 and 80 PVC pipe. • Heavy-bodied cement • Partial set takes approximately 2 minutes • Full cure takes 48 hours • Dauber top can for applying • Smooth consistency • Meets ASTM D2564 • Pressure range use up to 400 psi with liquids • Temperature range: 40°F to 100°F • Carries NSF seal for Potable Water, DWV & SW systems • Item cannot ship via air freight of any kind Price Price PVC Sch 80 Cement $12.58 $20.61 BUY MORE SAVE MORE / 5% on 12, 10% on 24, 15% on 72. FABRICATION NEW! TALON ™ Low VOC Heavy-Bodied PVC Cement TALON™ low VOC clear, heavy-bodied PVC cement is a smooth consistency, clear, heavy-bodied cement specially formulated for medium—and large-diameter solvent-weld PVC pipe and fittings. It should be used with a primer. TALON™ low VOC clear heavy-bodied PVC cement sets slow for use through 16" diameter schedule 40 & schedule 80 PVC pipe. • Premium formula for leak-free joints • Excellent for all PVC pipe & fittings • High-viscosity cement with gap-filling properties • Slow setting for more working time • Application temperature range: 40°F (5°C) to 100°F (38°C) • Pressure range (Liquids): Up to 350 psi • Drying Time: Slow (partial) -appx. 60 seconds. Cure time: 24 hours • Meets ASTM D2564 • NSF listed Price Quart Low VOC Clear Heavy-Bodied PVC Cement $18.78 BUY MORE SAVE MORE / 5% on 3, 10% on 6, 15% on 18. Whitlam PVC Blue Low VOC Heavy-Bodied Cement Heavy-duty, Low VOC PVC cement is a medium setting blue cement for use through 12" (30.48 cm) diameter Schedule 40 and 80 PVC pressure pipe and 16" (40.64 cm) diameter non-pressure pipe. It is suitable for use as a One-Step Solvent Weld Cement for Drain, Waste, and Vent (DWV) pipe and fittings in non-pressure applications in sizes up to 4" (10.16 cm), where it is acceptable by local code. The cement can be used in wet or dry applications at all temperatures. • Heavy-bodied, medium-set cement • Bright blue pigment • One-step, drip-free formula • A partial set takes approximately 20 seconds • A full cure takes 24 hours • Dauber top can for applying • Meets ASTM D2564 • Pressure range use up to 300 psi with liquids • Temperature range: 10°F to 120°F • Carries NSF seal for Potable Water, DWV & SW systems • Item cannot ship via air freight of any kind Price Quart PVC Heavy-Duty Cement $30.04 BUY MORE SAVE MORE / 5% on 12, 10% on 24, 15% on 72. IPS ® Weld On ® 700 ECO ™ Ultra Low VOC Cement Weld-On ® 700 ECO™ is an environmentally responsible cement with a 30% lower solvent emission rate and significantly reduced odorous fumes. • For use with Schedule 40 up to 4" Dia. • Regular bodied, fast setting & high strength • 4 year shelf life • Contributes toward satisfying Indoor Environmental Quality (EQ) credits for LEED ® v4 • ASTM, NSF & LEED certified • Item cannot ship via air freight of any kind Price Price IPS ® Weld On ® 700 ECO™ Ultra Low VOC $23.51 $39.58 BUY MORE SAVE MORE / 5% on 6, 10% on 12, 15% on 36. IPS ® Weld On ® 705 ECO ™ Ultra Low VOC Cement Weld-On ® 705 ECO™ is an environmentally responsible cement with a 30% lower solvent emission rate and significantly reduced odorous fumes than the current solvent cement in the market. • Medium-bodied, fast setting & high strength • 4 year shelf life • Contributes toward satisfying Indoor Environmental Quality (EQ) credits for LEED ® v4 • ASTM, NSF & LEED certified • Item cannot ship via air freight of any kind Price Price IPS ® Weld On ® 705 ECO™ Ultra Low VOC $26.77 $42.55 BUY MORE SAVE MORE / 5% on 6, 10% on 12, 15% on 36. Whitlam Heavy-Duty PVC White Low VOC Heavy-Bodied Cement This heavy-duty, low VOC PVC cement is a custom blend PVC solvent weld cement that allows for an improved appearance in PVC pipe assembly. The white color creates a blending effect for the pipe and fitting, making a cleaner finish for the installer's job. The medium setting cement is for use through 12" (30.48 cm) diameter Sch. 40 & Sch. 80 PVC pressure pipe and 16" (40.64 cm) diameter non-pressure pipe. It is suitable for use as a One-Step Solvent Weld Cement for Drain, Waste, and Vent (DWV) pipe and fittings in non-pressure applications in sizes up to 4" (10.16 cm), where it is acceptable by local code. IPS ® Weld On ® 711 ECO ™ Ultra Low VOC Cement Weld-On ® 711 ECO™ is an environmentally responsible cement with a 30% lower solvent emission rate and significantly reduced odorous fumes. It has great gap filling properties and suitable for potable water pressure. • For use with Schedule 80 up to 12" Dia. • Heavy bodied, medium setting & maximum strength • 3 year shelf life • Contributes toward satisfying Indoor Environmental Quality (EQ) credits for LEED ® v4 • ASTM, NSF & LEED certified • Item cannot ship via air freight of any kind Price IPS ® Weld On ® 711 ECO™ Ultra Low VOC $38.88 BUY MORE SAVE MORE / 5% on 6, 10% on 12, 15% on 36. • Heavy-bodied, medium-set cement • White pigment for fabricated look & finish • One-step, drip-free formula • A partial set takes approximately 20 seconds • A full cure takes 24 hours • Dauber top can for applying • Meets ASTM D2564 • Pressure range use up to 300 psi with liquids • Temperature range: 10°F to 120°F • Carries NSF seal for Potable Water, DWV & SW systems • Item cannot ship via air freight of any kind Price Quart PVC Heavy-Duty Cement $25.12 BUY MORE SAVE MORE / 5% on 12, 10% on 24, 15% on 72. Call: 800-537-9724 • Email: usp@usplastic.com • Online: www.usplastic.com 675
U.S. Plastic Corp. 2026 Volume 1: Page 675
