Cements, Syringes & Applicators SC-325 Polycarbonate Cement SC-325 is the simplest method of joining acrylics or polycarbonate to itself. Anti-blush agent included; however, you may still experience blushing under certain conditions such as high humidity. • Medium to high bond strength • Item can not ship via air freight of any kind Price Pint of Polycarbonate Cement SC-325 $84.35 BUY MORE SAVE MORE / 5% on 12, 10% on 24, 15% on 72. FABRICATION NEW! IPS ® Weld-On ® 3 ™ Acrylic Cement It is formulated for cementing acrylic plastic to itself. It will also form strong bonds with other thermoplastics such as polystyrene, CAB, PETG, and polycarbonate. It is not recommended for cross-linked acrylic. Item cannot ship via air freight of any kind. • Clear; Water-thin viscosity • DCM & TCE free • 2 minute fixture time; 1 minute working time • 24 hours to reach 80% of the ultimate bond strength • 1.33 ±0.04 specific gravity • Not for sale or use in California Price 4 oz. Weld-On ® 3™ Acrylic Cement $13.08 Pint Weld-On ® 3™ Acrylic Cement $25.23 Quart Weld-On ® 3™ Acrylic Cement $38.39 BUY MORE SAVE MORE / 5% on 4, 10% on 8, 15% on 24. Acrylic Adhesive SC-125 This acrylic cement is very thin and should be applied with a dropper or syringe. • Methylene chloride • Exceptionally fast setting cement for acrylics • Item cannot ship via air freight of any kind Price Pint of Acrylic Adhesive SC-125 $64.07 BUY MORE SAVE MORE / 5% on 12, 10% on 24, 15% on 72. NEW! IPS ® Weld-On ® 4 ™ Acrylic Cement The cement is formulated for cementing acrylic plastic to itself. It will also form strong bonds with other thermoplastics such as polystyrene, CAB, PETG, and polycarbonate. It is not recommended for cross-linked acrylic. Item cannot ship via air freight of any kind. • Clear; Water-thin viscosity • DCM & TCE free • 3 minute fixture time; 1-2 minute working time • 72 hours to reach 80% of the ultimate bond strength • 1.12 ±0.04 specific gravity • Not for sale or use in California Price 4 oz. Weld-On ® 4™ Acrylic Cement $13.08 Pint Weld-On ® 4™ Acrylic Cement $25.24 Quart Weld-On ® 4™ Acrylic Cement $38.39 BUY MORE SAVE MORE / 5% on 4, 10% on 8, 15% on 24. Multi-Purpose Dispensing Syringes These multi-purpose, multi-use disposable syringes include 3 pieces, a plunger, rubber tip, and barrel. • Natural/translucent • Includes plunger, rubber tip & barrel • Not FDA-compliant Price 1mL $.39 2mL $.42 3mL $.44 5mL $.53 10mL $.65 20mL $1.06 60mL $1.41 BUY MORE SAVE MORE / 5% on 50, 10% on 100, 15% on 300. Solvent Cement Applicator Use this plasticator for edge bonding of acrylic materials. • Designed for applying plastic solvent cement • Uses the capillary method • 1/2 oz. bottle with cap & 25 gauge metal needle • Needle protection included Price Applicator with 25 Gauge Needle $3.82 BUY MORE SAVE MORE / 5% on 24, 10% on 48, 15% on 144. Syringes Using the capillary method, this syringe is the choice for bonding acrylics and plastic. • Even, capillary control • Calibrated accuracy • Easy to fill & to replace needles Price $3.02 $3.02 $4.38 $5.58 $5.09 $6.87 BUY MORE SAVE MORE / 5% on 24, 10% on 48, 15% on 144. Dispensing Syringes Use this syringe for controlled dispensing of adhesives, sealants, caulks, greases, inks, colorants, additives, and chemicals. • PE barrel, plunger & nozzle cap • Leakproof • Accurate, measured doses Price $1.09 $1.04 BUY MORE SAVE MORE / 5% on 250, 10% on 500, 15% on 1500. Plexus ® MA310 Adhesive Kit This adhesive kit is a two-part methacrylate adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies. • Combined at a 1:1 ratio • Working time of 15 to 18 minutes • Achieves a rapid fixture in 30 to 35 min. at room temp. • Supplied in ready-to-use cartridges • Use for ABS, acrylics, epoxies, FRP, PVC, polyesters, urethanes, vinyl esters & more Price MA310 Adhesive Kit $42.62 Dispensing Gun $38.81 BUY MORE SAVE MORE / 5% on 6, 10% on 12, 15% on 36. Plexus ® MA300 Adhesive Kit This adhesive is a two-part methacrylate adhesive designed for structural bonding of thermoplastic, metal, and composite assemblies. • Combined at a 1:1 ratio • Working time of 4 to 5 minutes • Achieves a rapid fixture in 12 to 15 min. at room temp. • Supplied in ready-to-use cartridges • Use for ABS, acrylics, FRP, PVC, polyesters, urethanes, vinyl esters & more Price MA300 Adhesive Kit $42.62 Dispensing Gun $38.81 BUY MORE SAVE MORE / 5% on 6, 10% on 12, 15% on 36. Call: 800-537-9724 • Email: usp@usplastic.com • Online: www.usplastic.com 673
U.S. Plastic Corp. 2026 Volume 1: Page 673
