Swing Check NEW! Banjo ® Manifold Flange Check Valves The quick-change flange connections on these valves allow for replacement or inspection in seconds instead of time-consuming threaded liquid handling systems. Easy to use, there is no pipe thread installation, chance of cross-threading, pipe sealant, or cure time needed, saving time and money. • Glass-reinforced polypropylene body • EPDM or Viton™ gasket • Type 316 stainless steel spring • One-piece construction • Quick & easy assembly; Easy on & off hose connections • 360° orientation • Positive seals • Temperature range: 0°F to 150°F Price $32.38 $18.89 $29.44 $24.46 $32.17 $43.02 BUY MORE SAVE MORE / 5% on 4, 10% on 8, 15% on 24. VALVES Spring Check Valves Spring check valves are used to prevent back-flow and siphoning. Suggested applications include pool/spa, irrigation, and commercial water systems. • EPDM seals • 302 SS spring • 2 lb. SS spring maintains a positive seal even when no back pressure is present • Flow direction indicator molded into body • 2 psi minimum flow pressure is required to open valve • Pressure rating: 100 psi non-shock water @ 73°F Price Price $10.20 $10.20 $10.99 $10.99 $16.23 $16.24 $21.68 $21.68 $22.40 $22.40 $26.93 $26.93 BUY MORE SAVE MORE / 5% on 10, 10% on 20, 15% on 60. Swing Check Valves Designed to prevent backflow in irrigation, swimming pools, and commercial plumbing, these check valves allow continuous flow with minimal head loss. Install with the flow arrow pointing in the direction of the system flow and positioned on the top side of the valve. • PVC body & weighted disc • EPDM seals • Stainless steel fasteners • Valve can be disassembled for maintenance • Resist process & atmospheric corrosion • Flow velocity should not exceed 5 ft./second • Designed for horizontal installation • Valves must NOT be installed upside-down • Pressure rating @ 73°F, non-shock water: full flow (open) 150 psi; back pressure (closed) 75 psi • Maximum temperature: 140°F Price $18.89 $20.79 $28.41 $34.98 $76.48 $94.21 $182.86 BUY MORE SAVE MORE / 5% on 2, 10% on 4, 15% on 12. GF Cone Check Valves Types 561 & 562 GF 561 and 562 valves feature a check cone design that optimizes flow and reduces pressure loss. The Type 562 (horizontal) valve closes leak-tight with its built-in spring, even without water pressure. Both valves operate autonomously, with Type 562 requiring no other energy source and Type 561 needing minimal line pressure. The streamlined check cone enhances flow without sacrificing functionality or leak-tightness, while the specially developed seal ensures a leakproof closure, even at quick speeds. • PVC • FPM or EPDM seals • 562 valves come standard with SS spring • All come with both socket & thread end connectors • Sealing pressure: 2.9 psi (561) or 1.45 psi (562) • Maximum temperature: 140°F Price $91.53 $91.53 $96.44 $116.23 $139.48 $184.04 $270.03 $109.30 $92.53 $126.84 $137.51 $165.56 $173.34 $289.64 $130.26 $130.26 $146.76 $137.28 $192.25 $239.12 $343.07 BUY MORE SAVE MORE / 5% on 2, 10% on 4, 15% on 12. Hayward ® SW Series Swing Check Valves Valves are designed for slurries and liquids that can damage valve seats. Unlike ordinary valves, they feature a two-in-one seat design for extended service life. If one seat is damaged, simply reposition the clapper to use the other seat and reverse the valve in the pipeline. Available in CPVC and polypropylene, contact us for a quote. • PVC body; FPM or EPDM seals • Two drain ports • Self-aligning clapper seals • Built-in flange seals • Horizontal or vertical installation • High Cv rating & full flow design • Bubble-tight checking, with a minimum of just 3 psi back pressure • Pressure rating: 150 psi @ 70°F non-shock • Maximum temperature: 140°F Price Price $1,936.38 $1,540.19 $2,632.61 $1,960.91 $3,860.57 $3,034.14 $5,322.54 $4,328.72 BUY MORE SAVE MORE / 5% on 2, 10% on 4, 15% on 12. Call: 800-537-9724 • Email: usp@usplastic.com • Online: www.usplastic.com 531
U.S. Plastic Corp. 2026 Volume 1: Page 531
